Do not install the detector:
1. Fix the SmartBracket attachment panels and the magnet using the bundled
screws. If using any other attachment hardware, make sure that they do not
damage or deform the panel.
Double-sided adhesive tape may be only used for temporary attachment. The tape
will run dry in the course of time, which may result in falling of DoorProtect and
actuation of the security system. Furthermore, the device may fail from a hit.
2. Put the detector on the attachment panel. As soon as the detector is xed in
SmartBracket, it will blink with a LEDsignaling that the tamper is closed.
If the light indicator do not blink after installing in SmartBracket, check the status of
the tamper in the Ajax app and then the xing tightness of the panel.
If the detector is torn off from the surface or removed from the attachment
panel, you will receive a noti cation.
3. Put the magnet on the attachment panel.
1. outside the premises (outdoors);
2. nearby any metal objects or mirrors causing attenuation or interference of
the signal;
