Qvis DoorProtect, Руководство пользователя

Страница: 6 / 15

Parameter Value
Temperature
The temperature of the detector. The
temperature is measured on the processor and
changes gradually
Jeweller Signal Strength
The signal strength between the hub and the
detector
Connection
The connection status between the hub and the
detector
Battery Charge
The battery level of the detector, displayed in
increments of 25%
Lid
The tamper state, which reacts to detachment
or damaging of the detector body
Delay When Entering, sec The delay time when entering
Delay When Leaving, sec The delay time when exiting
Routed Through Rex
Indicates if the detector is routed through a
radio signal range extender
Primary Detector The primary detector status
Secondary Detector
The status of the external detector connected
to DoorProtect
Always Active
If active, the detector is always in the armed
mode
Firmware The detector rmware version
Device ID The device identi er