Quinton ClubTrack, Руководство по обслуживанию

Страница: 68 / 148

5. Lower the grade until the treadmill is level. Measure from the
bottom of the siderail to the floor at both the front and rear of
the treadmill. Adjust the grade until both measurements are
identical.
6. Rotate the grade pot shaft with a screwdriver until the grade
display reads
0.0
.
7. Tighten the setscrew and verify that the display still reads
0.0
.
8. Press
Clear
to exit open-loop mode.
9. Verify that the treadmill operates through its full grade range
(0-15%) and that the treadmill is nearly all the way to the top
of the rack gear when the display reads 15%.
10. Turn the treadmill circuit breaker off, disconnect the power
cord, and replace the hood.
Speed Calibration
The speed of the belt can be checked for accuracy. The display and
control are digitally controlled and cannot be adjusted. See Step E
of the Complete Field Functional Test in Appendix D
, Functional
Field Tests.
Grade Calibration
The treadmill grade is controlled through the grade pot and grade
pot installation procedure and cannot be adjusted. See Step D of
the Complete Field Functional Test in Appendix D,
Functional Field
Tests.
Repair/Replacement and Calibration 4-34