Quinton ClubTrack, Руководство по обслуживанию

Страница: 66 / 148

Field Functional Test
To verify that the treadmill is operating properly, perform Field
Test No. 5. See Appendix D,
Field Functional Tests, for specific
instructions.
Cumulative Use
The cumulative use feature lets you determine the amount of wear
on the belt and motor by displaying the total distance or total time
of use for each treadmill. This data can be useful for scheduling
service.
See separate procedure below for HR ClubTrack Plus (p/n 00425).
A
The cumulative time and distance are stored in the controller.
Both values are zero if a new controller is installed. Loading a
factory default program will reset the time and distance to zero.
Distance
To determine the total distance on each treadmill:
1. Press
Power
to turn on the treadmill controller.
2. Simultaneously press
Stop
and
Slower
.
3. Multiply the number that appears in the multifunction display
by 10 to obtain the cumulative total in miles or hours.
4. Record the mileage and the date for your records.
5. Press
Clear
to reset the display for operation.
Time
To determine the total time of treadmill use:
1. Press
Power
to turn on the treadmill controller.
2. Simultaneously press
Stop
and
Faster
.
3. Multiply the number that appears in the center display by 10
to obtain the total number of hours of operation.
4. Record the total time and the date for your records.
5. Press
Clear
to reset the display for operation.
For HR ClubTrack Plus Treadmills only
A
In the HR ClubTrack Plus, total time, total distance, and current
distance are calculated and saved in the HRC; therefore, any
controller replacement restarts the maintenance counters. Total
time and distance are saved into non-volatile memory every
time the stop belt function is activated.
To view cumulated time and distance, enter custom mode and
select
Maintenance Information . The screen shows the cumulated
time and distance.
Repair/Replacement and Calibration 4-32