Quincy Compressor QCV 045, Инструкция

Страница: 35 / 56

Section VI - Operating instruction
35
Filling the oil in gearbox
Follow below steps to fill the oil in gearbox:
Reference Name
1 Oil filler plug
2 Oil sight glass
1 Remove the canopy panel(s) in order to get access to the internal components.
2 Remove the oil filler plug (1).
3 Pour oil in the gearbox up to the middle of the sight glass (2).
4 Close the filler plug. Remove all oil spills on the pump and/or floor.
5 Reinstall the canopy panel(s).
Stopping
It is recommended to run the unit isolated for typically 15 minutes pumping clean dry air
at around 50-100 mbar(a) prior to switching off. If the air stream was heavily
contaminated with water vapour, a longer period of running the unit off-line can only
extend lifetime.
Taking out of operation
The operator must apply all relevant safety precautions. See
section Safety precautions during operation.
Also consult section Problem solving
Procedure
:
 Switch off the voltage and disconnect the pump from the mains.