background image

QR400 Manual

3

WELCOME TO QUIK SPRAY

On behalf of the Quik Spray team, we would like to thank you for investing in a quality Quik Spray product. Our units are 
manufactured to the highest standard of quality, with every individual unit hand-assembled to guarantee our customers the best 
product and service possible. As an Australian owned business your investment has enabled our every success.

As a division of Quik Corp, our team have provided over three decades of high-quality agricultural products to the Australian 
market. From our humble beginnings in 1988, our product range has continually expanded and our innovation sparks from the 
passion and commitment we have for the agricultural industry.

All Quik Spray units are fabricated and hand-assembled right here in 
Warana, Queensland. We control all aspects of the fabrication and 
assembly process, ensuring you get the highest quality product. We are 
extremely proud and dedicated to providing jobs to local employees in the 
local manufacturing sector.

Producing the world’s first remote controlled retractable hose reel system in 1988, Quik Spray is the preferred choice of spray 
units for farmers, councils, contractors and nurseries.
With innovation, valuable expertise and the most dedicated service, we produce superior equipement suited to the harsh 
Australian environment. After 30 years, we know what it takes to make the most trusted sprayer on the market.

Содержание QUIKSPRAY QR400 UTV SYSTEM



































Отзывы: