QR400 Manual
11
FILTER HOUSING
1. Filter housing and removal nut. The filter housing is
located behind the Honda motor. To clean filter with
water in the tank, turn valve OFF before loosening filter
nut. Ensure O-ring is seated properly before tightening
nut.
MOUNTING YOUR SPRAY UNIT TO YOUR VEHICLE
To mount your QR400 securely, attach the bolt down brackets to the tank using bolts and washers supplied with your unit.
FIGURE 1
At the base of the tank, you will find brass threaded inserts
so you can attach the mounting plate. Measure the holes
where you need to drill into the vehicle tray.
FIGURE 2
NOTE: Washers must be fitted between the bracket and tank
as per this example, when fitting the bracket to the tank.
FIGURE 3
Attach hold down brackets to the tank using the bolts and
washers supplied. Fit securely to tank and vehicle tray.
Содержание QUIKSPRAY QR400 UTV SYSTEM
