QUIK CORP QUIKSPRAY QR400 UTV SYSTEM, Инструкция по эксплуатации

Страница: 28 / 34

QR400 Manual 27
WARRANTY POLICY
This document sets out the warranties that are given by Quik Corp Pty Ltd (ABN 18 081 235 556) in relation to the Product purchased from or manufactured by Quik
Corp.
1. Definitions
1.1. In this warranty policy:
“Quik Corp” means Quik Corp Pty Ltd (ABN 18 081 235 556);
“Customer” means the party who originally acquired the Product from Quik Corp, or an authorised distributor, reseller or dealer for Quik Corp, for their own use.
“OEM Equipment” means the items of equipment fitted to the product by Quik Corp and which items have been manufactured by others and have their own
manufacturer’s warranty.
“Product” means the goods or machinery that the Customer acquired and which were manufactured by Quik Corp.
2. Warranty
2.1. Subject to clause 3 and clause 4, Quik Corp warrants to the Customer that the Product will be free from proven defects in material and workmanship for
twelve months from the date of purchase by the Customer, unless a specific warranty period applies to a component listed in appendix A.
2.2.
The warranty is not transferable.
3. Limitations
3.1. This warranty does not cover damages resulting from shipping and handling, abuse, accidents, alterations, normal wear or failure to maintain or use the Quik
Corp product with due care.
3.2.
Quik Corp does not warrant that the operation of the product will be uninterrupted or error free. The Customer must read and follow all instructions and
manuals for the setup, maintenance and use of the Product. If the Customer fails to do so, the product may not function correctly and may suffer other damage.
3.3.
This warranty does not extend to OEM equipment which has its own warrant and the Customer must rely on the OEM equipment warranty for any defects in
material or workmanship relating to the OEM equipment.
3.4.
This warranty does not extend to cover corrosion due to any cause nor to any damage to painted or anodised surfaces that occurs after the Customer takes
delivery of the product.
3.5.
This warranty does not cover time required to diagnose a warranty problem.
3.6. The use of parts other than Quik Corp parts for repair of warranted items will automatically negate any warranty. Warranted components must be replaced
with genuine Quik Corp parts.
3.7.
Repairs by an unauthorised agent will automatically forfeit any warranty. Warranty repairs must be carried out by Quik Corp or an authorised Quik Corp
Dealer/Service Agent only.
3.8.
This warranty does not cover transportation or insurance costs for Products needing repair or replacement of warranted components. Nor does it cover any
freight or insurance costs in obtaining new parts or returning old parts to Quik Corp for inspection purposes.
3.9.
The time taken to remove and re-install a warranted part or component into other brands of equipment will not be covered by the Quik Corp warranty. Only
parts and labour directly attributable to the repair of the Quik Corp unit is covered.
3.10.
Quik Corp does not pay for cleaning, or clean the Product, accessories or work area before or after the warranty repair.
3.11. Quik Corp assumes no responsibility for improper choice of models or where products are used in excess of rated capacities and design functions, or under
abnormal conditions. We make available a free technical service to help with any product selection, application or situation.
4. Repair or Replace
4.1. During the warranty period, Quik Corp or its authorised Dealer/Service Agent shall repair or replace, at Quik Corp’s discretion, without charge for parts and
standard labour, any part of the Quik Corp Product which fails because of defects in material or workmanship unless the damage arises from:
4.1.1.
Failure resulting from neglect or misuse, such as improper operation, lack of required maintenance or continued use of the Product after the discovery of a
defect which results in greater damage to the Product;
4.1.2.
Deteriorated or failed components such as but not limited to diaphragms, O-rings, hoses, seals, electrical wiring and connections damaged by corrosive
chemicals, dirt and sand, excessive heat or moisture. The Customer should ensure the type and strength of chemicals used in the Product are compatible with the design
of the Product;
4.1.3.
The use of accessories, hardware, or software which were not manufactured by, installed by or approved in writing by Quik Corp;
4.1.4. The use of consumable items such as but not limited to oils, lubricants, diaphragms, O-rings, hoses seals, gaskets, filter elements, flow meters, clutches, drive
belts, pivot pins, paint, batteries, radio transmitters, radio relays, push buttons, switches, hose rollers, aerials, spray guns and nozzles as these items are considered to
be normal wear items and are not warranted;
4.1.5.
Component failure caused by not performing scheduled maintenance service such as oils, grease, failure to clean tanks, pumps, filters, spray lines, nozzles or
any other components and not tightening or replacing loose or missing bolts, nuts, fittings, shields and covers;
4.1.6.
Damage or machine failure caused by carelessness or accidental damage, improper operation, inappropriate transportation or storage of the Product;
4.1.7. Any contamination or leakages caused or induced by the Customer;
4.1.8. Any use or operation of the Product outside the physical, electrical or environmental specifications of the Product;
4.1.9. Any alterations, modifications, attachments or unauthorised repairs to the Product which have not been authorised in writing by Quik Corp; and
4.1.10. Failures due to faulty or inadequate electrical sources of power.
5. OEM Warranties
5.1. All OEM (Original Equipment Manufacturer) components are covered by the Original Manufacturer’s Warranty. It is the Customer’s responsibility to familiarise
themselves with these warranties, and subject to clause 7, that is the only warranty given to the customer in respect of that part of the Product.
6. Statutory Rights and Exclusions (New Zealand Only)
6.1. If the Product has been acquired for the purposes of a business then pursuant to section 43(2) of the Consumer Guarantees Act 1993 (“CGA”) it is agreed that
the provisions of the CGA do not apply. To the fullest extent permitted by law in New Zealand, Quik Corp excludes any liability for any direct or indirect loss or damage
of any kind arising from the Product, including consequential loss or damage or loss of profits, and loss or damage arising from the negligence of Quik Corp’s employees
and agents. The warranty is personal to the Customer and cannot be transferred to a subsequent purchaser (although the purchaser, in some circumstances, may have
rights under the CGA or the Sale of Goods Act). These exclusions do not exclude Quik Corp’s liability in respect of any warranties or guarantees implied by any relevant
legislation in New Zealand which cannot legally be contracted out of.