QUIK CORP QUIKSPRAY QR400 UTV SYSTEM, Инструкция по эксплуатации

Страница: 18 / 34

QR400 Manual 17
OPERATION INSTRUCTIONS
1. Turn radio ON/OFF power switch to the ON position.
Assign each operator with a transmitter. If you are using
a twin reel system, be sure that each operator is carrying
the correct transmitter to their corresponding reel.
2. Quik Spray reels will free-wheel out to the desired
distance.

Do not pull the hose out too fast. This may cause the reel
to ‘run-on’ and become tangled.
3. When the operator is ready to retract the hose, press the
button on the transmitter to retract the hose back onto
the unit reel.

Be aware of strong retraction! Be prepared to release the
transmitter button when approaching the reel/s as personal
injury or damage to the unit may occur.
4. When operation is complete, turn radio switch to OFF
position to prevent the 12 volt battery from discharging.
5. It is recommended that the 12 volt battery be connected
to an automatic battery charger when not in use.This will
help avoid any damage to the 12 volt battery and help
keep the unit working at peak performance.
TURNING ON TRANSMITTER
USING THE TRANSMITTER TO RETRACT HOSE

CAUTION
Do not pull hose out too fast, as the reel may “run on”, causing the hose to become entangled.
When you are ready to retract the hose, press and hold the transmitter button to retract the hose back to the unit.

CAUTION
Always ensure the hose is in front of the operator.
To operate the transmitter for retraction, the operator must be at least 2-3 meters away from the unit.
Ensure all set-up instructions are complete.
When you are ready to operate the reel, turn the radio switch ON and carry the transmitter with the operator.
The reel will free-wheel out to the desired distance.