QUBINO ZMNHDD2, Руководства пользователя

Страница: 68 / 70

EN .
68
- CO Alarm v2 – CO detected, unknown location (0x02)
- CO2 Alarm – CO2 detected, unknown loc (0x02)
- Heat Alarm v2 – Overheat detected, unknown location (0x02)
- Water Alarm v2 – Water Leak detected, unknown location (0x02)
- Home Security – Motion Detection, unknown location (0x08)
COMMAND_CLASS_BASIC:
- The device will be turned ON or OFF after receiving the BASIC_SET command. To be turned
ON: [Command Class Basic, Basic Set, Basic Value = 0x01~0x63 in percentage; FF set to last
value]
- To be turned OFF: [Command Class Basic, Basic Set, Basic Value = 0x00]
COMMAND_CLASS_METER
•
Default values:
o
Rate Type = 1 (Import)
o
Scale = 0 (kWh)
This product can be included and operated in any Z-Wave network with other Z-Wave certified
devices from any other manufacturers. All constantly powered nodes in the same network will
act as repeaters regardless of the vendor in order to increase reliability of the network.