How to punch in the notes of the selected step:
How to select the Velocity of the chosen step:
CAUTION: You can hear the change of the Velocity-value through these numbered buttons only
if on the selected sound the parameter VCA-DYN or VCF-DYN is turned on.
How to punch in the length of a tone on the selected step
How to punch in the movement of a selected step:
How to store a User-arpeggio:
With the numbered-buttons 1-8 you can activate single notes for this step or you can switch them
off. „1” means the lowest on the keyboard played note will be replayed. If you activate the
numbered - buttons „1” and „2”, the lowest and then the directly following note will be played.
Because you can select from maximum 8 numbered-buttons, chords with up to 8 notes are possible
for each step. Of course you also can decide on deactivating all of the 8 numbered buttons. This of
course will mean a break in your pattern.
Through the numbered buttons 9-12 you can select the velocity for each step. Of course only one of
the buttons ranging from 9-12 is possible to use. The velocity will effect all the activated note-
numbers equally.
:
Using the numbered buttons 13-16 you can adjust the length of the tone (GATE-time) within four
steps.
In addition every step can be moved forwards or backwards by up to 50% of the selected Resolution.
With a setting of +50% and a Resolution of 16th notes the whole step will be delayed by one 32nd
note. Especially with extremely accurate settings these parameters will guarantee a very groovy note-
release (Gate-release).
For each step this value is adjustable with the VALUE-wheel.
Now please choose the different steps one after the other out of the pattern and adjust them the way
you want. Don’t hesitate to change the number of the played notes on the keyboard or just play a
whole different chord. Often your arpeggiator-pattern will change drastically. You will also find out,
that selecting only two used note-numbers also a polyphonic (for instance 8-notes) chord will only
release (play) 2 different notes.
In order to be able to use your own created pattern in the future, you need to store it. the free-
programmable arpeggio-pattern won’t be automatically stored by storing a sound. The sounds only
call up the motion-numbers 1-9. To store the new arpeggio-pattern you need to choose menu-page
4 of the write-menu. Press the Write-button and choose the menu-page 4 by using the PAGE/BANK-
buttons.
Edit Arpeggiator
<12> Step01: +50%
The Arpeggiator
67
!