Quantum TC2201E Скачать руководство пользователя страница 156

Страница: 156 / 202

Perform Configuration

136

Quantum TC2201E User’s Guide

• Select

from the Device Mapping menu to activate port mapping

changes.

Caution:

Before activating any port mapping changes, it is strongly

recommended that the user verify there are not any

command or data operations occurring in conjunction

with devices affected by the mapping changes. For

example, deleting a LUN or device from a map may

disrupt I/O transfers with that device. It is the user’s

responsibility to ensure that no operations will be

negatively impacted due to the activation of mapping

changes.

Trace and Event
Settings
Configuration

This option allows set up of trace and events settings.

Note:

All current Mapping Settings will take effect immediately! If

another management interface has made unsaved mapping

changes, those changes will be lost.

Note:

If the Activate Port Mapping Changes option is not selected,

the mapping changes will not take effect unless the TC2201E is

rebooted.

Note:

After the TC2201E reboots, the Configuration Menu will

appear.

Содержание TC2201E











































































































































































































Результаты поиска

Содержание TC2201E

Отзывы:

Похожие инструкции для TC2201E

Бренды по названию

Популярные бренды

Quantum TC2201E, Руководство пользователя

Результаты поиска

Содержание TC2201E

Отзывы:

Похожие инструкции для TC2201E

Бренды по названию

Популярные бренды