Quantum TC2201E, Руководство пользователя

Страница: 48 / 202

Chapter 2 Getting Started
Save Backup Version of Configuration
28 Quantum TC2201E User’s Guide
the desired bus by pressing the Enter key. Then use the Edit Initiator
Settings menu option to make changes. Select X to return to the
Configuration menu.
5
Select the letter
A
from the Configuration Menu to save your
configuration changes to the TC2201E. Once the TC2201E saves your
configuration changes, enter X to exit to the Main menu.
6
Select menu option
2
to access the System Utilities menu.
7
Select menu option
1
to access the System Statistics menu.
8
Select menu option
1
to access the Display Parallel SCSI Protocol
Status menu.
9
Select menu option
2
to access the Display Attached SCSI Devices
menu.
10
Select menu option
4
to display all local SCSI devices. If any device is
shown in the “DOWN” state, inspect that device. If a device fails to
appear at all, make sure the device is powered on and check cable
connections. It may be necessary to perform a manual discovery
(select menu option 1, 2, or 3) or to reboot the TC2201E (from main
menu). Select X four times to return to the Configuration menu.
11
Select menu option
4
to reboot the TC2201E. In about 2 minutes, the
TC2201E will once again display the main menu.
12
If the TC2201E does not see all of the devices expected, repeat step 3
above, and check that the initiator ID(s) are set to a unique value for
the selected bus. Again, you must save any changes and reboot the
TC2201E.
You have now successfully configured the TC2201E. This procedure
may not apply to all situations, but does address most key issues
required for initial setup.
Save Backup Version of Configuration
2
Once all desired configuration settings are in place, it is recommended to
save a backup version of the configuration settings. By doing so, this will
help ensure that in the event of a serious problem such as a forgotten user
name or password, it will be possible to restore all the settings. For more
information, see Using the FTP Interface on page 155.