Quantum TC2201E, Руководство пользователя

Страница: 53 / 202

Chapter 3 Quantum Visual Manager
Accessing Visual Manager
Quantum TC2201E User’s Guide 33
6
Once the host computer's web browser can access the TC2201E,
Quantum Visual Manager (QVM) will display the TC2201E's "Home
page" in the browser window. This page provides a high-level
snapshot of the TC2201E's status, and is accessible to anyone who
knows (and can reach) the TC2201E's IP address. The Report Page is
also accessible without needing special access. However, additional
TC2201E information, and all TC2201E configuration settings, are
user- and password-protected. Selecting other options will cause a
login window to appear, where the user can enter a user name and
password. The TC2201E defaults are
root
for user name and
password
for password. This information is required only once per session
(described below).
7
Upon successful login, the user has initiated a "session", and has full
access to the TC2201E QVM for the duration of the session. A session
ends when the user exits all instances of the web browser. Log-in will
be required again, via the TC2201E's home page, to initiate a new
session.
Note:
For DHCP usage information, see the Network settings in this
chapter and in Appendix D.
Note:
Unless otherwise indicated, configuration changes take effect
when the unit next powers on or reboots.
Note:
For the QVM interface’s dynamic display of the TC2201E
configuration to be presented properly, use version 6.2 or later
of Netscape’s browser on non-Solaris platforms, or Netscape
version 6.2.3 for Solaris platforms. If using Internet Explorer,
use revision 6.0 or later.
Note:
It is recommended to change the user name and password
from the defaults. For more information, see Main Menu >
System > User Settings .
Note:
To end the current session of Visual Manager, it is necessary to
close all instances of the browser window. Merely navigating
the browser to another URL is not sufficient to end the current
session.