Quantum TC2201E Скачать руководство пользователя страница 83

Страница: 83 / 202

Chapter 3 Quantum Visual Manager

Main Menu

Quantum TC2201E User’s Guide

• Delete the currently selected host or map by selecting the respective

Delete

button.

• View or Edit the currently selected host or map by selecting the

respective

Edit/View

button.

• Clone (via the

Clone Map

button) the currently selected map and set

up the name of the new cloned map. This option makes it easier to

setup new maps with similar information to

previously created maps. Auto Assigned maps cannot be cloned.

• Select the

Activate Mapping Changes

button to dynamically update

the current map without rebooting the TC2201E. These changes are

made effective immediately after being submitted.

Caution:

Before activating any port mapping changes, it is strongly

recommended that the user verify there are not any

command or data operations occurring in conjunction

with devices affected by the mapping changes. For

example, deleting a LUN or device from a map may

disrupt I/O transfers with that device. It is the user’s

responsibility to ensure that no operations will be

negatively impacted due to the activation of mapping

changes.

The following shows the select host page when the Select Host

Edit/View

button is selected.

Note:

All current Mapping Settings will take effect immediately! If

another management interface has made unsaved mapping

changes, those changes will be lost.

Note:

If the

Activate Mapping Changes

button is not selected, the

mapping changes will not take effect unless the TC2201E is

rebooted.

Содержание TC2201E











































































































































































































Результаты поиска

Содержание TC2201E

Отзывы:

Похожие инструкции для TC2201E

Бренды по названию

Популярные бренды

Quantum TC2201E, Руководство пользователя

Результаты поиска

Содержание TC2201E

Отзывы:

Похожие инструкции для TC2201E

Бренды по названию

Популярные бренды