Quantum Scalar 218FC, Руководство пользователя

Страница: 16 / 127

6 Getting Started
Installation of the Scalar 218FC desktop unit requires checking all necessary Fibre Channel interface
connections, loading application software on the host computer, and applying power. Installation of the rack-
mount unit begins by mounting slide rails, a cable channel, and channel stop to your rack before continuing
the installation.
Requirements
The footprint of your Scalar 218FC Library is 19.0 inches wide, 27.6 inches deep, and 11.0 inches high.
You must allow clearance at the rear and sides of the desktop unit for airflow and enough room at the
top to permit you to bulk load and unload data cartridges through the sliding access panel. To bulk load
and unload cartridges from the rack-mount unit, you must slide the library out from the rack to the stop
limits of the rails. There must be adequate clearance above it, to perform the bulk load/unload
procedure.
You must integrate your Scalar 218FC into your host computer system. Backup software and a Fibre-
Channel Host Bus Adapter interface card must be purchased separately.
Necessary tools: to install the rack-mount unit, you will need the following tools.
#1 philips screwdriver.
11/32-inch hex nut-driver.
Unpacking and Inspecting
Warning
The Scalar 218FC weighs more than 60 pounds. Do Not attempt to lift the
Library out of the packing box by yourself. See the Scalar 218FC Unpacking
Instructions , taped to the outside of the poly bag surrounding the Scalar, for
complete unpacking instructions.
1. Following the procedures in the document mentioned in the above warning, unpack all items from the
carton. Save the packing materials in case you need to move or ship the system in the future.
Caution
You must use the original or equivalent packing materials when shipping the
Scalar 218FC. Failure to use the original or equivalent materials may
invalidate your warranty.