Quantum Scalar 218FC, Руководство пользователя

Страница: 127 / 127

Index 117
SCSI configuration, 21 , 25 , 26
SCSI Configuration Menu, 25
SCSI Controller Command. See SCC
SCSI Device Addressing, 70
SCSI devices, 14 , 70
SCSI Fibre Channel Protocol, 43
SCSI I/O Connectors, 43
SCSI ID, 47 , 82 , 101
SCSI Initiator ID, 25
SCSI Initiators to Fibre Channel Targets, 73
SCSI Interface, 30
SCSI LED, 42
SCSI Mapping Mode Configuration Menu, 28
SCSI Reset Operation \i, 26
SCSI Target ID,
26
SCSI terminator, 54 , 102
SCSI-3 Controller Command Set. See SCC
SCSI-to-Fibre Channel Mapping, 29
Serial Dnld Flash Mode, 45 , 52
serial port, 31
serial port baud rate, 21 , 31
Set SCSI ID parameter, 14 , 45 , 46 , 47
Setting the SCSI IDs, vii , 14
shipping bracket, 7 , 8
SNMP Configuration, 30
SNMP Management Information Base, 30
space requirements, 6
Subnet Mask, 30
surrounding environment, 7
sustained data transfer rate, 2
System Integrity, 3
T
tape density, 3
Tape in Use LED, 54 , 55
Target ID Priority Display, 27
target SCSI ID, 25 , 30
Term Power LED, 54
Trace Dump, 35
Trace Dump menu, 35
trace level, 29
Trace level settings, 21
Trace Settings Configuration,
29 , 35
Transfer menu, 36
U
Unpacking and Inspecting, 6
Use Cleaning Tape LED, 54 , 61 , 62
Use Cleaning Tape warning, 54 , 104
Using the Mailbox, 60 , 62
V
valid cartridge locations, 3
Verify SCSI Bus parameter, 45 , 46 , 50
W
warranty, ii , iii , 6 , 95 , 101
Warranty Registration card, 7
When You Call ADIC Customer Assistance, 67
World Wide Name High, 29
World Wide Name Low, 30
Write Flash Memory Mode, 45 , 51 , 52
Write Protected LED, 54
write-protect switch, 9 , 10 , 58 , 66
X
X-modem data transfer protocol, 18
XMODEM protocol, 36
Blank Page