35
RDX 8000 User Guide
5.9.4 Network Status Page
This section depicts the Monitor Network Status page and describes each field on the page.
Figure 17 — RDX 8000 Monitor Network Status
IP Address:
This field displays the primary IP address of the RDX 8000.
Bonding Mode:
This field displays the active bonding mode of the RDX 8000.
MAC Address:
This field displays the main hardware Media Access Control address for the unit. The MAC address is a worldwide
unique address assigned to the unit. The MAC address is embedded in the unit and is not changeable by the customer.
Link State:
This field displays the current status of the network connection, Up indicates a network connection is established. Down
indicates either no network connection or a failed network connection.
Link Speed:
This field indicates the current network connection speed for the link. To achieve maximum performance the RDX 8000
should to be connected to the network via a 1 GB/s connection.
Duplex:
This field indicates full duplex or half duplex network connection. Most networks support full duplex communications.
