13
RDX 8000 User Guide
4.1.2 Installation precautions
Select a location that meets the following criteria:
CAUTION
Static sensitive
Risk of damage to devices
• A discharge of static electricity damages static-sensitive devices or micro circuitry.
• Proper packaging and grounding techniques are necessary precautions to prevent
damage.
NOTICE
• Do not expose the unit to moisture.
• Use the unit on a firm level surface free from vibration.
• Do not place anything on top of the unit.
4.1.3 Unpacking the unit
Before unpacking the unit, clear a work surface to unpack the RDX 8000. Select either a table top location or if the unit is
to be rack mounted an open rack location at least 2U spaces in vertical height.
Make sure that the intended operating location provides access to the network connection(s) which will be used and an
accessible AC power outlet within 6 ft. of the unit.
NOTICE
If the temperature in the room where the unit will be installed varies by 15º C (30º F)
from the room where the unit was stored, allow the unit to acclimate to the surrounding
environment for at least 12 hours before unpacking it from the shipping container.
Unpacking the RDX 8000:
1. Before opening and removing the RDX 8000 from the box, inspect the container for shipping damage. If you
notice any damage, report it to the shipping company immediately.
2. Open the RDX 8000 over pack box.
3. Carefully remove the accessory tray and shipping materials from the top of the over pack box.
4. Remove the inner box containing the RDX 8000.
5. Open the RDX 8000 box.
6. Lift the RDX 8000 out of the carton and remove the bag from the unit.
7. Save the packaging materials for future use.
NOTICE
Do not place the unit on either end or sides as this may damage the unit.
