Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
Installing Additional Libraries
39
Installing the Libraries
0
Refer to
Installing the Library
on page 15 for information on installing the
library chassis into the rack. The libraries must be stacked without space
between units.
Configuring the Libraries
in a Multiple Stack
0
The libraries initialize by default in a “Stand Alone” configuration. The
libraries must be set to either a “Master” or “Slave” configuration through the
OCP so the libraries recognize the other units in the stack.
To configure the libraries in a multiple stack:
1
Select one of the libraries in the stack to be the “Master” library. This
library can occupy any position in the stack.
2
Refer to
Setting the Library Options
on page 33 for information on setting
the library’s stack role.
