Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
8
Unpacking the Library
• Do not place static-sensitive parts on a metal surface. Place them inside
their protective shipping bag or on an antistatic mat.
• Avoid touching connectors and other components.
Unpacking the Library
0
This section explains how to unpack both the PX506 and PX510 library
components and move them to their final installation location. By following
these instructions, you help ensure that the system will continue to be
safeguarded after it arrives at the installation site.
Unpack and remove the following components from the packing materials
(see
figure 4
for PX506 and
figure 5
for PX510):
1
Remove the accessories kit and set it aside.
2
With the help of a second person, lift the library chassis up and out of the
shipping carton.
3
Place the library on a table approximately waist high.
Note:
Dry climates and cold-weather heating environments have lower
relative humidity and are more likely to produce static electricity.
Note:
Inspect the outer library packaging for damage. If there is any
damage evident on the library packaging, to not continue with the
installation and contact Quantum customer support.
Note:
Unpack the library as close to the installation location as possible.
Warning:
At least two people are required to move the library
chassis.
Caution:
Lift the library chassis at the sides. Avoid putting the
weight of the library chassis on the front bezel.
