Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
32
Installing the Library
Loading the Tape
Cartridges
0
Before operating the library, load the appropriate tape cartridges (LTO and/
or SDLT) into the library starting with the left-hand magazines (refer to the
Quantum PX500 Series User’s Guide
PN 81-8290 for more information on tape
cartridges).
Initial Configuration
0
Initially configuring the library consists of the following steps:
•
Turning on the Library
•
Setting the Library Options
•
Setting the Date and Time
•
Setting Network Information
Turning on the Library
0
To turn on the library:
1
Verify that:
• Power cables are firmly in place
• All doors are closed
2
Push the power button located behind the OCP cover (see
figure 26
).
Figure 26 Turning On the
Library
During the power up sequence, the library performs an inventory. The
power up sequence can take several minutes.
Power button
OCP
