2
Quantum
Installation, User and Service Manual
Important -This Manual Should Be Left With The Householder After Installation
Index
Section
Page
1
Introduction
2
2
Technical specifications
3
3
Check list
3
4
General requirements
4
5
Primary circuit installation
6
6
Secondary circuit installation
10
7
Discharge arrangement
12
8
Electrical installation
15
9
Filling and commissioning
17
10
Servicing and maintenance
18
11
Fault finding
19
12
User instructions
20
13
Warranty
20
1. Introduction
The
Quantum “Hot Spring”
is a high quality stainless steel domestic hot water cylinder
suitable for use on “unvented” or “open vented” hot water systems. The indirect heat exchange
surfaces are designed to provide a rapid heat up. The unit incorporates a 3kW electric immersion
heater as a “backup” or for summer use. When the unit is supplied for unvented applications, it
comes complete with all the necessary safety equipment to comply with legislation governing the
installation of such systems. The immersion heater and temperature and pressure relief valve
(when required) are factory fitted.
