Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
Web Services Support (Optional)
17
Note again that the credential token can be omitted because the syscli program
can use the cached value.
Supported Web
Services Commands
The DXi 2.0.1 Software release supports about 20 Web Services commands, also
known as “operations” in the areas of Replication, NAS, and System Utilities. To
see a complete list, one can type the following URL in a browser:
http://<hostname_or_ipaddress_of_DXi_system>:9090/axis2/services
The output is as follows (with the equivalent syscli commands listed in
parentheses):
WSReplication Service
Available Operations:
• disableNASReplication (syscli -disablerep nas)
• enableNASReplication (syscli -enablerep nas)
• addReplicationSource (syscli -add sourcerep)
• deleteReplicationTarget (syscli -del targetrep)
• addReplicationTarget (syscli -add targetrep)
• deleteReplicationSource (syscli -del sourcerep)
WSNas Service
Available Operations:
• deleteAllShares (syscli –deleteall share)
• getShare (syscli –get share)
• updateShare (syscli –edit share)
• deleteShare (syscli –del share)
• getShares (syscli –list share)
• getShareNames (syscli –list sharename)
• getShareCount (syscli –getcount share)
• addShare (syscli –add share)
WSSystem Service (System Utility)
Available Operations:
• runCommand (syscli –runcmd)
• getPermissions (syscli –get permission)
• releaseCredential (syscli –release credential)
• authenticate (syscli –authenticate)
How to Run
Unsupported Web
Services Commands
The vast majority of CLI commands are not supported to run over Web Services
in DXi 2.0.1 Software. However, they can be run over WS via the command
syscli --runcmd
because this command is supported for execution over Web
Services.
