Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
CLI Error Codes
227
E6003283
Nodemanage:Invalid cluster action.
E6003284
Nodemanage:Invalid cluster state.
E6003285
Nodemanage:Invalid cluster role.
E6003286
Nodemanage:Invalid power state.
E6003287
Nodemanage:The operation is not supported.
E6003288
Nodemanage:Core services failed, join not allowed.
E6003289
Nodemanage:This operation is currently disabled.
E6003290
Nodemanage:An error occurred while opening a file.
E6003291
Nodemanage:An error occurred while reading a file.
E6003292
Nodemanage:The operation failed due to a communication
error.
E6003293
Nodemanage:An error occurred while writing a file.
E6003294
Nodemanage:The node is not in a degraded state.
E6003295
Nodemanage:Invalid cluster severity.
E6003296
Nodemanage:The node is not present.
E6003297
Nodemanage:The reset operation failed.
E6003298
Nodemanage:The process monitor is already enabled.
E6003299
Nodemanage:The process monitor is already disabled.
E6003300
Nodemanage:Invalid process monitor state.
E6003301
Nodemanage:Invalid Hardware state.
E6003302
Nodemanage:The number of SMITH counts has been
exceeded.
E6003303
Nodemanage:The number of STOMITH counts has been
exceeded.
E6003304
Nodemanage:Blockpool verification in process. Cannot
reboot,shutdown or reset the nodes.
E6003601
GenDiaglog: Option "gen" is missing.
E6003602
GenDiaglog: Option "gen" requires a value
E6003603
GenDiaglog: Option "gen" has invalid value
E6003604
GenDiaglog: Failed to read/get option "gen".
E6003605
GenDiaglog: Failed to write/set option "gen".
E6003611
Gendiaglog: Failed to read/get option "system".
E6003612
Gendiaglog: Failed to write/set option "system".
Error Code
Error Message