Quantum DXi4500, Руководство пользователя

Страница: 42 / 322

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
42 Replication CLI Commands
to stable storage. This mode improves I/O performance but may cause
data inconsistencies in case of power failure or severe interruptions.
b Standard mode: Honor the NFS commit calls truthfully by committing
cached data to stable storage before responding to the clients. This
mode guarantees data integrity in case of power failures or severe
interruptions.
This CLI command sets up NFS server to run in Standard mode , with NFS
commits synchronously between server and client.
Commit NFS
Asynchronously
syscli --nfscommit async {--share <sharename>} | --all
This CLI command allows the admin user to set up NFS shares so that data are
committed asynchronously to NFS shares. The user can set up this property for
one NFS share at a time or all NFS shares at the same time. By default, NFS
shares are created to commit data synchronously until changed by this
command.
This CLI command sets up NFS server to run in
Accelerated mode , where NFS
commit messages are acknowledged asynchronous after receipt.
Replication CLI Commands
The following sections describe the supported replication CLI commands:
Note: VTL and cartridge based replication CLI commands are available only on
DXi6700 systems.
• Initiating a Cartridge Based, File/Directory Based, or Namespace Replication
• Locking a VTL or NAS Share
• Unlocking a VTL or NAS Share
• Getting VTL or NAS Share Lock Status
• Initiating Source to Target Cartridge or File Synchronization
• Generating a Replication Report
• Listing the Allowed Replication Sources for the Target
• Adding a Source on a Target
• Deleting a Source on a Target
• Listing the Replication Targets for the Source
• Adding a Target on a Source
• Deleting a Target on the Source
• Enabling VTL Replication Options on the Source
• Disabling VTL Replication Options on the Source