Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
256
CLI Error Codes
E8050011
Unable to get the list of ifcfg files.
E8050012
Cannot determine if eth file belongs to a bond.
E8050013
An error occurred setting the MTU to enable jumbo frames.
E8050014
Cannot write network config file to persist jumbo frame
setting.
E8050015
Invalid network device specified.
E8050016
No matching network device exists.
E8050017
An error occurred getting the MTU to get jumbo frame
status.
E8050018
An error occurred getting the gateway.
E8050019
An error occurred getting the default gateway.
E8050021
Confignetseg: Failed Processing options using getopt for
confignetseg.sh
E8050022
Confignetseg: Too many arguments for QUERY.
E8050023
Confignetseg: Too many arguments for XML.
E8050024
Confignetseg: Hostname is missing.
E8050025
Confignetseg: Too many arguments RESTARTALL.
E8050026
Confignetseg: Too many arguments for STOPALL.
E8050027
Confignetseg: Too many arguments for STARTALL.
E8050028
Confignetseg: Too many arguments for DEFAULTS.
E8050029
Confignetseg: Gateway IP address is missing.
E8050030
Confignetseg: Segmented IP Addresses for Management,
Data, and Replication are required.
E8050031
Confignetseg: Duplicate segmented IP Addresses for
Management, Data, and Replication are not allowed.
E8050032
Confignetseg: Netmasks for the segmented IP Addresses for
Management, Data, and Replication are required.
E8050033
Confignetseg: Default gateway is invalid.
E8050034
Confignetseg: For using segmented networking, the
segmented IP Address's should be in different subnets.
E8050035
Confignetseg: ALL_1 BONDING with no SEGMENTATION
requires a BONDIP, BIPNETMASK and ETH5IP, EIP5NETMASK.
E8050036
Confignetseg: ALL_1 BONDING with no SEGMENTATION
requires a BIPNETMASK for BONDIP and EIP5NETMASK for
ETHIP5.
Error Code
Error Message