Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
Path To Tape CLI Commands
91
Deleting a Backup User
syscli --del backupuser --name <backup_user_name>
This CLI command allows the admin user to delete a backup application user.
Deleting All Backup
Users
syscli --deleteall backupuser [--sure]
This CLI command allows the admin user to delete all existing backup
application users.
Listing Backup Users
syscli --list backupuser
This CLI command provides a list of backup application users.
Listing Medium
Changers
syscli --list medchanger
This CLI command provides a list of medium changers that are present on the
system now.
Listing Tape Drives
syscli --list tapedrive --serialnumber <serialnumber>
This CLI command provides a list of tape drives that are present on a given
physical library.
•
--serialnumber
: Must be a valid physical library serial number. Use -
-list
medchanger
to get all available medium changer serial numbers.
Scanning Devices
syscli --scan device
This CLI command allows the admin user to detect any physical tape library
attached to the system.
Using Medium
Changers
syscli --use medchanger --sernum <medium changer serial number>
--usetype {backupapplicationspecific | remove | ignore}
This CLI command allows the admin user to set the intended use for the
specified medium changer.
•
--sernum
: Must be a valid serial number of the medium changer. Use the
--list
medchanger command to get all the medium changer serial numbers.
•
--usetype
: Type of intended use for the medium changer.
