Chapter 2 Operating the Library
Using the Control Panel Menus
Quantum|ATL 7100 Series Library Operator’s Guide
29
Setting the Library
SCSI Address
2
The SCSI address of the library can be set using the SCSI Address/
Robotics submenus.
1
Enter the menu mode.
2
Press the
SELECT
button to choose the Configuration menu
and verify the following is displayed in the SDA:
3
Press the
↓
button once time to bypass the Inquiry menu and
verify the following is displayed in the SDA:
4
Press the
SELECT
button to choose the SCSI Address submenu
and verify the following is displayed in the SDA:
5
Press the
SELECT
button to choose the Robotics submenu and
verify the following is displayed in the SDA:
6
Use the
↑
and
↓
buttons to navigate to the SCSI ID number for
the library.
7
With the proper
SCSI ID
number displayed on line 2, press the
SELECT
button.
Note:
The default SCSI address for the library is 0 (zero).
Note:
SCSI address 7 is typically reserved for the host
controller.
Menu:Configuration
Inquiry
Menu:Configuration
SCSI Address
Menu:SCSI Address
Robotics
Menu:Robotics
SCSI ID 0
Содержание ATL 7100
