Quantum ATL 7100, Руководство оператора

Страница: 33 / 78

Chapter 2 Operating the Library
Operating Procedures
Quantum|ATL 7100 Series Library Operator’s Guide 17
Working With
Tape Cartridges
2
Applying Bar Code Labels to Cartridges
2
A bar code label is the identification for the cartridge. Apply a bar
code label to all cartridges used in the library. When applying:
• Only use the bar code labels provided with the library.
• Apply the bar code label to the front face (see figure 10 ).
Figure 10 Bar Code
Label on a Tape
Cartridge
Adding Tape Cartridges Through the Load Port
2
To add a tape cartridge through the load port:
1
Verify that each cartridge has a bar code label.
Note:
Enable the auto load option before performing this task
(see
Enabling/Disabling the Auto Load Option on
page 36).
Caution:
DO NOT USE CompacTape I

, CompacTape II

or
CompacTape IIIXT

tape cartridges in this library.
Caution:
Examine all cartridges before adding them to the
library. Look for label stock or foreign material that
may be clinging to the cartridges.
Bar code label