Quantum ATL 7100, Руководство по установке

Страница: 34 / 68

Chapter 2 Unpacking and Moving the Library
Removing the Protective Packaging Material
18 Quantum|ATL 7100 Series Facilities Planning and Installation Guide
Removing the Protective Packaging Material
2
Refer to the figure 9 throughout this procedure.
1
Locate the library door keys in the accessory kit and open the
storage array door.
2
Remove the block securing the gripper.
3
Without cutting it, remove the tie-wrap securing the extension
axis platform to the horizontal axis carriage (see
figure 8) . The
tie-wrap is reusable.
4
Gently lift the extension axis up and pull the vertical axis block
out and away from the library.
5
Without cutting, remove the tie-wraps securing the horizontal
carriage assembly to the frame. The tie-wraps are reusable.
6
Gently push the carriage assembly forward.
7
Remove both the top and bottom horizontal axis blocks.
8
Slowly lower the extension axis to the bottom (resting)
position.
9
Close the storage array door.