Quantum Data 881, Руководство пользователя

Страница: 970 / 1144

592 Appendix A Command Reference
XGIF
Generic InfoFrame Data
Class InfoFrame Packet
Description Writes generic InfoFrame packet data. This allows you to emulate any InfoFrame type
(including vendor-specific).
Note: The HDMI specification (section 5.2.3.2) requires that an HDMI packet must be
transmitted at least every two VSYNC periods, or the receiver will drop out of HDMI mode.
A Generic InfoFrame packet can be used for this purpose by enabling its repeat bit (see the
IFTR command).
Command syntax XGIF type version length [REG] TYPE VERS LEN INFO
REG (Register or slot) this is an optional parameter
A or B
The remaining are GIF Infoframe data parameters ( gifparameter ) as specified in
EIA/CEA-861-D standard, Section 6.1:
TYPE (same as type )
Infoframe type
VERS (same as version )
Infoframe version
LEN (same as length )
Infoframe length (in bytes) - maximum 27 bytes
INFO
hexidecimal payload data in the form of ASCII characters—each representing one
4-bit nibble of data. If less than 50 ASCII characters are specified, the remaining bytes
are set to zero.
Query syntax XGIF: gifparameter ?
Query response value
Example The following example writes 5 bytes of Vendor Specific InfoFrame (Type 1) data.
XGIF A 1 1 5 12FA001234 // uses 882 register A, vendor specific infoframe
(type 1), version 1 and 5 bytes in length.
IFGU
Related commands IFTR , IFAX:RPTU , IFGU