Quantum Data 881 Скачать руководство пользователя страница 320

Страница: 320 / 1144

308

Chapter 9

Testing HDMI Sink Devices

Testing HDMI InfoFrames (882 only)

This section provides steps on how to test handling of auxiliary (InfoFrame) packets by an

HDMI display. The 882 loads and sends default Auxiliary Video Information (XAVI), Audio

(XAUD), and Source Product Description (XSPD) InfoFrame packet buffers to the display

for each format (see table on page 256 for a list of HDMI formats). The XAVI and the

XAUD InfoFrame packets are sent at every frame (repeated mode), while the XSPD is

sent only once. The XMPG and XGIF InfoFrames are gated off and not enabled.

Note: This feature is not supported on the 881 generator.

HDMI provides various types of auxiliary data in the form of InfoFrames. InfoFrames allow

the HDMI source to keep an HDMI display informed as to “what is coming down the pipe”

so that it can present the content optimally—without any viewer intervention.

There are five different types of InfoFrames:

•

auxiliary video information (AVI)

•

audio (AUD)

•

source product description (SPD)

•

MPEG information (MPG)

•

generic (vendor-specific) information (GIF)

Each type carries information regarding a different aspect of the HDMI audio/video

transmission.

The procedures below can be performed using the front panel or the command line

interface.

Viewing InfoFrame contents (882 only)

The 882 provides a convenient method for monitoring the InfoFrame content of the

transmitted HDMI signal. The procedure below describes how to view current InfoFrame

contents.

Note: This feature is not supported on the 881 generator.

To view current HDMI InfoFrame contents transmitted from the 882:

1. Set up the 882 for HDMI output. See “

Setting up the 882 for HDMI testing

” on page 259.

2. Press the

Source

key and choose a format suitable for the HDMI display (for example,

DMT0660). Refer to the table in “

Format selection

” on page 255.

Alternatively, to select the format using the command line interface, enter the following

commands:

FMTP

/tffs0/Library/Formats // Set format path to 882 memory

Содержание 881

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 881

Отзывы:

Похожие инструкции для 881

Бренды по названию

Популярные бренды

Quantum Data 881, Руководство пользователя

Результаты поиска

Содержание 881

Отзывы:

Похожие инструкции для 881

Бренды по названию

Популярные бренды