Quantum Data 881, Руководство пользователя

Страница: 1113 / 1144

882 Video Test Instrument User Guide (Rev A.35) 675
4005 Sequence editor running
The current firmware does not allow a new test sequence editing session to be started
while the current test sequence editing session is still running.
4006 No sequence to save
An attempt was made to save the contents of a test sequence editing buffer when there
was no open test sequence editing session to save.
4007 Sequence buffer full
No more steps can be added to the current sequence being edited because no more edit
buffer space is available.
4008 Invalid delay setting in sequence
The test sequence contains one or more steps that have a negative number for the step
delay time.
4010 Font index out of range
An attempt was made to use a font at an index location that is less than zero (0) or greater
than the highest index number in use.
4020 No font present at given index
Attempt to access a font at a valid index but the specified index is empty because of a
previous delete.
4030 Invalid font location
Can not install a font that has not first been transferred to memory.
4040 Sequence is running
A sequence editing session can not be started while a sequence is running.
4045 No sequence buffer
An attempt was made to change a parameter in a sequence step when there were no
sequence steps in the current sequence being edited.
4100 Pattern index out of range
The selected index number for a drawing primitive’s fill pattern is less than zero or greater
than the highest number used by the current firmware.
4576 Can not convert to inches, not valid units
The format’s current physical units of measure (inches or millimeters) is unknown and the
firmware is unable to convert a dimension to inches.