MINISYSTEM Manual Version 1.5
Page 16
4.
Installation
Unpacking the Laser System
The laser system has been carefully packaged for shipment. If the container arrives damaged in
any way, please contact the shipper's agent to be present for the unpacking. Inspect each unit as
it is unpacked, looking for dents, scratches, or other damage. If damage is evident, immediately
file a claim against the carrier and notify the manufacturer.
It is recommended that the shipping container be kept for possible further shipping purposes,
should the unit require repair or maintenance services. If a damage claim has been filed, the
container will be needed to prove shipping damage.
The laser system is a turnkey system, designed so that a field service engineer is not required to
get the system up and operating properly. The system has undergone extensive testing to verify
its conformance to the specifications prior to delivery.
Before operating the laser however, it is important to fully understand its main features and
controls.
CAUTION: Do not power up the system before thoroughly reading the
system description. Use of the controls or adjustments, or performance of
procedures other than those specified in this user’s manual my result in
hazardous radiation exposure, laser system damage or result in voiding
the warranty. Please refrain from connection the main power until you
make sure the power switch is in the OFF position.
System Inventory
The miniSystem Laser system consists of the following items. Verify that all listed items are
present in the shipping container. If there are any shortages or discrepancies, contact Quantum
Composers immediately.
miniSystem Laser System Payload
Desktop Power Supply
USB Cable
SMART Controller (Optional)
User
’s Manual and Control Software on Disk
Acceptance Test Results
