QuadTech Sentry Plus Series, Инструкция по эксплуатации

Страница: 43 / 85

Operation Page 43 of 85
2.8 Programming a Pause in Test Sequence
“PAUSE” is a mode selection that allows a test sequence to be stopped while test leads are
changed or other operations performed. A 15-character user programmable message will be
displayed on the screen when in PAUSE mode and the test will continue when the [START]
button is pressed or when START is initiated via remote I/O. The Under Test relay on the
remote I/O can also be cycled during PAUSE if required. During the test sequence when
PAUSE is encountered the tester stops, displays PAUSE and 15-character message until START
button is pressed again (or START is initiated via remote I/O).
This mode is applicable to the Sentry 10, 20 and 30 Plus instruments. With the instrument in
‘stand-by’ status, press [F1] = PROGRAM. If continuing the 5-step example from ¶2.7, you are
already in program mode and on the AC test mode page. This example shows a GC test as
Step1, an AC test as Step 2, a DC test as Step 3, an IR test as Step 4 and finally how to program
a Pause as Step5. Follow the
green arrows (
!
) on the right side of this diagram to program the
individual Pause mode parameters. Enter a message (length 1-15 characters) for the operator.
Continued on Next Page.
Select
PA
Test Mode
To move highlighted box to
PAUSE
UP
DOWN
EXIT
NEXT
RMT ERR OFST LOCK Select Mode
F1
F4
F3
F2
RAMP
ARC
LOW AC STEP 5/5
VOLT
HIGH
OFF
OFF
OFF
[F1] = NEW
Program
Step 5 = PA To move highlighted box to MODE.
To exit programming mode.
To delete or insert a test step.
To change value of highlighted box.
FIRST
MORE..
EXIT
NEXT
RMT ERR OFST LOCK Voltage is 0
F1
F4
F3
F2
RAMP
ARC
LOW AC STEP
VOLT
HIGH
TIME
OFF
OFF
OFF
0.000kV :
:
:
:
:
3.0s
0.500mA
:
:
:
:
:
:
5/5
0.000kV
0.500mA
FALL OFF :
Set MODE = PA
UP
DOWN
CANCEL
NEXT C.
RMT ERR OFST LOCK 1 - 15 CHAR.
F1
F4
F3
F2
PA STEP 5/5
PAUSE
UNDER TEST SIGNAL
Enter
Pause
Message
To enter message:
1 - 15 characters: * + , - . /
0 -9 and A - Z
:
: PAUSE MODE
OFF
UP
DOWN
CANCEL
NEXT
RMT ERR OFST LOCK 1 - 15 CHAR.
F1
F4
F3
F2
PA STEP 5/5
PAUSE
UNDER TEST SIGNAL
Enter
Pause
Message To move highlighted box to UNDER.
To move cusor to next character.
:
: CHANGE-DUT
OFF
To erase message.
FALL OFF :
: TIME 3.0s