Quadro 350D, Руководство пользователя

Страница: 59 / 92

59
Level Checks Level Checks
Level Checks Level Checks
Level Checks
n
Wait for 5 minutes after switching off the engine.
n
Rest the vehicle on its centre stand and on level ground.
n Loosen and remove the filler plug/dipstick «1» «1» «1» «1» «1» and dry it with a clean rug.
n
Refit and tighten the filler plug/dipstick «1» «1»
«1» «1»
«1» (fig. 02_06).
n
Loosen and remove the filler plug/dipstick «1» for a second time
and check that the oil level is now between
«««««
MIN MIN MIN MIN MIN
»»»»»
and
«««««
MAX MAX MAX MAX MAX
»»»»»
marks as show in the figure (03_06)
Running the engine with insufficient or contaminated Running the engine with insufficient or contaminated Running the engine with insufficient or contaminated Running the engine with insufficient or contaminated Running the engine with insufficient or contaminated
oil will cause engine damage. If the low oil pressure
oil will cause engine damage. If the low oil pressure oil will cause engine damage. If the low oil pressure oil will cause engine damage. If the low oil pressure oil will cause engine damage. If the low oil pressure
indicator remains on, stop the engine immediately.
indicator remains on, stop the engine immediately. indicator remains on, stop the engine immediately. indicator remains on, stop the engine immediately. indicator remains on, stop the engine immediately.
A T T E N T I O N A T T E N T I O N A T T E N T I O N A T T E N T I O N A T T E N T I O N
Fig.03_06 Fig.03_06 Fig.03_06 Fig.03_06 Fig.03_06
Fig.04_06 Fig.04_06
Fig.04_06 Fig.04_06 Fig.04_06
MAINTENANCE VEHICLE MAINTENANCE VEHICLE MAINTENANCE VEHICLE MAINTENANCE VEHICLE MAINTENANCE VEHICLE
T TT
TTop up
op up
op up op up op up
Any oil top up must occur only after level check.
If the oil level is below the MIN MIN MIN MIN MIN marking, add oil a little at a time
through the filler plug hole until the correct level is reached.
For top ups, proceed as follows:
n
Remove the filler plug/dipstick and add oil.
n Check that the oil level is between the
«««««
MIN MIN MIN MIN MIN
»»»»»
and
«««««
MAX MAX MAX MAX MAX
»»»»»
marks
(see figure 03_06).