Quadro 350D, Руководство пользователя

Страница: 64 / 92

64
Always dispose of old batteries responsibly. For their Always dispose of old batteries responsibly. For their
Always dispose of old batteries responsibly. For their Always dispose of old batteries responsibly. For their Always dispose of old batteries responsibly. For their
disposal, please observe their local regulations.
disposal, please observe their local regulations.
disposal, please observe their local regulations. disposal, please observe their local regulations. disposal, please observe their local regulations.
Do not disconnect the battery leads with the engine Do not disconnect the battery leads with the engine Do not disconnect the battery leads with the engine Do not disconnect the battery leads with the engine Do not disconnect the battery leads with the engine
r u n n i n g .
r u n n i n g . r u n n i n g . r u n n i n g . r u n n i n g .
W A R N I N G W A R N I N G W A R N I N G W A R N I N G W A R N I N G
C h e c k C h e c k
C h e c k C h e c k C h e c k
Ensure that the battery leads and terminals are not excessively
corroded. If necessary, use a wire brush to clean them.
6.8 BATTERY 6.8 BATTERY
6.8 BATTERY 6.8 BATTERY 6.8 BATTERY
W A R N I N G W A R N I N G W A R N I N G W A R N I N G W A R N I N G A T T E N T I O N A T T E N T I O N A T T E N T I O N A T T E N T I O N A T T E N T I O N
When removing the battery, the engine must When removing the battery, the engine must When removing the battery, the engine must When removing the battery, the engine must When removing the battery, the engine must
be off and the ignition key must not be in the
be off and the ignition key must not be in the
be off and the ignition key must not be in the be off and the ignition key must not be in the
be off and the ignition key must not be in the
ignition switch.
ignition switch.
ignition switch. ignition switch. ignition switch.
Removal Removal Removal Removal Removal
To replace the battery, proceed as follows:
§
Rest the vehicle on its centre stand and on level ground.
§
Ensure that the ignition key is not inserted into the ignition switch.
§
Remove battery cover «A»
«A»
«A» «A» «A» by looseing the two screws below
than release the three upper side tabs.
§
Disconnect the leads «1»
«1»
«1» «1» «1» starting from the negative lead «««««-----»»»»»
followed by the positive «+» «+» «+» «+» «+».
§
Loosen the screw shown and remove the retaining bracket «B».
§
Remove the battery.
Fig.13_06 Fig.13_06
Fig.13_06 Fig.13_06
Fig.13_06
Fig.14_06 Fig.14_06 Fig.14_06 Fig.14_06 Fig.14_06
MAINTENANCE VEHICLE MAINTENANCE VEHICLE
MAINTENANCE VEHICLE MAINTENANCE VEHICLE MAINTENANCE VEHICLE