Quadra-Fire Adventure-II Скачать руководство пользователя

Страница: 3 / 32

Read this manual before installing or operating this appliance.

Please retain this owner’s manual for future references.

A. Congratulations

Congratulations on selecting a Quadra-Fire wood burning

appliance. The Quadra-Fire appliance you have selected

is designed to provide the utmost in safety, reliability, and

efficiency.
As the owner of a new appliance, you'll want to read and

carefully follow all of the instructions contained in this

Owner's Manual. Pay special attention to all Cautions and

Warnings.

This Owner's Manual should be retained for future refer-

ence. We suggest that you keep it with your other impor-

tant documents and product manuals.
Your new Quadra-Fire wood burning appliance will give

you years of performance and easy operation. Welcome

to the Quadra-Fire family of hearth appliance products!

Listing Label Information/Location

The model information regarding your specific appliance can be found on

the rating plate located on the back of the appliance.

Welcome

Quadra-fire is a registered trademark of Hearth & Home

Technologies.

Brand: ________________________________________________ Model Name: ___________________________

Serial Number: __________________________________________ Date Installed: __________________________

Appliance Information:

Local Dealer Information

DEALER: Fill in

your name, address,

phone and email

information here and

appliance information

below.

Dealer Name: ________________________________________________________

Address: ____________________________________________________________

____________________________________________________________

Phone: _____________________________________________________________

Email: _____________________________________________________________

CAUTION:

HOT WHILE IN OPERATION DO NOT TOUCH,

KEEP CHILDREN AND CLOTHING AWAY.

CONTACT MAY CAUSE SKIN BURNS. KEEP

FURNISHINGS AND OTHER COMBUSTIBLE

MATERIAL FAR AWAY FROM THE APPLIANCE.

SEE NAMEPLATE AND INSTRUCTIONS

LISTED ROOM HEATER, SOLID FUEL TYPE.

ALSO FOR USE IN MOBILE HOMES. (UM)

84-HUD .

"For Use with Solid Wood Fuel Only"

Adventure III

SERIAL NO.

009

######

Solid Fuel Room Heater

Issue No.

PREVENT HOUSE FIRES

Install and use only in accordance with

manufacturer's installation and operating

instructions. Contact local building or fire officials

about restrictions and installation inspections in

your area. Do not obstruct the space beneath

heater.

SUITABLE FOR MOBILE HOME INSTALLATION

WARNING - For Mobile Homes

: Do not install in

a sleeping room. An outside combustion air inlet

must be provided and unrestricted while unit is in

use. The structural integrity of the mobile home

floor, ceiling and walls must be maintained. The

stove needs to be properly grounded to the frame

of the mobile home. Components required for

mobile home installation: Outside Air Kit, Part

Number OAK-ADV.

Refer to manufacturer's instructions

and local

codes for precautions required for passing

chimney through a combustible wall or ceiling and

maximum offsets.

Inspect and clean chimney frequently - Under

Certain Conditions of Use, Creosote Buildup May

Occur Rapidly.

Do not connect this unit to a chimney serving

another appliance.

Optional Components: Optional Blower, Part

BK-350.

Electrical Rating: 115 VAC, 1.2 Amps, 60 Hz.

Route power cord away from unit. Do not route

cord under or in front of appliance.

DANGER: Risk of electrical shock.

Disconnect

power supply before servicing.

Replace glass only with 5mm ceramic available

from your dealer.

Do not use grate or elevate fire. Build wood fire

directly on hearth.

Do not overfire - if heater or chimney connector

glows, you are overfiring.

OPERATE ONLY WITH DOORS CLOSED

Open only to add fuel to the fire.
Do

NOT

operate before fully assembling

components.

WARNING

: Only use approved wood fuel listed in

owners manual. Burning any other fuel will void

warranty.

VENT SPECIFICATIONS:

SINGLE WALL:

Six inch (6 inches) (152mm) diameter,

minimum 24 MSG black or blued steel connector pipe, with a
listed factory-built UL103HT* Class "A" chimney, suitable for
use with solid fuels, or a masonry chimney, and the referenced
clearances.

DOUBLE WALL:

Six inch (6 inches) (152mm) diameter,

Listed double wall air insulated connector pipe with listed
factory-built UL103HT* Class "A" chimney, or a masonry

chimney and the referenced clearances

MOBILE HOME:

Use Listed double wall pipe by Dura-Vent

DVL, Selkirk Metalbestos DS or Security DL double wall
connector pipe. Must be equipped with a spark arrestor.
Apply double wall clearances below when installing unit.

INSTALLATION: FULL VERTICAL

H I J

SINGLE WALL PIPE

17.5 11.5 28.5 20 8 22.5 42 18 *

DOUBLE WALL PIPE

15.5 9.5 29.5 16 4 17.5 42 13 *

INSTALLATION: HORIZONTAL WITH MINIMUM 2 FT VERTICAL OFF STOVE TOP

SINGLE WALL PIPE

17.5 11.5 28.5 20 * * 42 18 *

DOUBLE WALL PIPE

15.5

9.5 29.5 16

* 42 13 18 31.5

INSTALLATION: ALCOVE

- Six inch (6 inches) (152mm) diameter Listed DOUBLE WALL air insulated connector pipe with UL103 HT** Listed factory-built

Class "A" chimney, or a masonry chimney. (Mobile Home must be equipped with a spark arrestor.) Maximum depth of Alcove shall be no more than 48

inches (1219mm) with a minimum height of 84.0 inches (2134mm) from floor to bottom of ceiling and the referenced clearances.

(**In Canada must comply with Standard CAN/ULC-S629-M87 for the 650

C Factory-built chimney.)

BACKWALL/SIDE

WALL

90 OFF TOP UP & OUT

CEILING CLEARANCE

CORNER

INSTALLATION

ALCOVE TOP

VIEW

ALCOVE SIDE

VIEW

FLOOR PROTECTION:

Floor protector must

be 1/2 in. minimum non-combu

stible material extending beneath heater and to front/sides/rear as indicated on the diagram

below. Exception: Non-combustible floor protections must extend beneath the flue pipe when installed with horizontal venting and extend 2

inches (51mm) beyond each side.

16" from glass

USA

Fuel loading door

33-5/8”

minimum

44-1/2”

minimum

This wood heater needs periodic inspection and repair for proper operation.

Consult the owner’s manual for further information. It is against federal

regulations to operate this wood heater in a manner inconsistent with the operating

instructions in the owner’s manual.

U.S. ENVIRONMENTAL PROTECTION AGENCY - Certified to comply with 2015

particulate emission standards. Not approved for sale after May 15, 2020.

This wood heater was found to have an average emissions rate of 2.9 g/hr using

Method 5G2.

4083-990A

Manufactured by:

1915 West Saunders, Mt. Pleasant, IA 52641

www.quadrafire.com

Made in U.S.A.

of US and

imported parts.

DO NOT REMOVE THIS LABEL

MIN CLEARANCES TO COMBUSTIBLE
MATERIALS: Inches & (Millimeters)
NOTE: All "A" , "C" and "F" Dimensions
are to the center diameter of flue collar.

Quadra-Fire • Adventure-III Owner’s Manual • 4083-900 • Rev D • 09/15

Содержание Adventure-II

































Результаты поиска

Содержание Adventure-II

Отзывы:

Похожие инструкции для Adventure-II

Бренды по названию

Популярные бренды

Quadra-Fire Adventure-II, Руководство пользователя

Результаты поиска

Содержание Adventure-II

Отзывы:

Похожие инструкции для Adventure-II

Бренды по названию

Популярные бренды