Program Schedule Override (temporary)
Press or to immediately adjust the temperature.
This will temporarily override the temperature setting
for the current time period.
The new temperature will be maintained only until the
next programmed time period begins. For example, if
you want to turn up the heat early in the morning, it will
automatically be lowered later, when you leave for the
day.
To cancel the temporary setting at any time, press
RUN
SCHEDULE.
►
►
Program Schedule Override (permanent)
Press
HOLD
to permanently adjust the temperature.
This will override the temperature settings for all time
periods.
The “Hold” feature turns off the program schedule and
allows you to adjust the thermostat manually, as need-
ed.
Whatever temperature you set will be maintained 24
hours a day, until you manually change it, or press
RUN SCHEDULE
to cancel “Hold” and resume the pr-
grammed schedule.
To Adjust Program Schedules
1. Press
SET CLOCK/DAY/SCHEDULE, then SET
SCHEDULE.
2. Press / to set your weekday wake time (Mon-
Fri), then press
NEXT.
3. Press / to set the temperature for this
time period, then press
NEXT.
4. Set time and temperature for the next time period
(Leave). Repeat steps 2 and 3 for each weekday
time period.
5. Press
NEXT
to set weekend time periods (Sat-
Sun), then press
DONE
to save & exit.
NOTE:
You can press
CANCEL PERIOD
to eliminate
unwanted time periods (except Wake).
►
►
►
►
Saturday and Sunday can be programmed individu-
ally by changing the format from 5-2 to 5-1-1. To
change the format :
1. Press and hold the up button and the center button
until the display changes.
2. Press up or down to change system function num-
ber to 16.
3. Press
NEXT
to advance to next function.
4. Press up or down to change status number to 1.
5. Press
DONE
to exit and save settings.
Program Schedule
Pre-set settings are shown below.
You can program 4 time periods each day, with different
settings for weekdays and weekends.
Wake
- Set to time and temper-
ature you want in the morning
until you leave for the day.
Leave
- Set the time and tem-
perature you want the heat out-
put reduced to during the day.
Return
- Set the time and tem-
perature to what you want the
heat output increased to in the
evening.
Sleep
– Set the time and tem-
perature to what you want for
overnight.
Thermostat Controls
Function buttons
Press to select the function
displayed just above each
button. (Functions change
depending on the task.)
Digital display
Temperature buttons
Press up or down to set preferred
temperature.
Hold button
Press to override pro-
grammed temperature
control
Programming Thermostat
The thermostat maintains a desired room temperature
by adjusting the heat output as the thermostat calls for
heat. The 5-2 day programmable function allows one
program for week days and a separate program for Sat-
urday/Sunday. (Up to 4 periods per day).
12
Quadra-Fire • Adventure-III Owner’s Manual • 4083-900 • Rev D • 09/15
