7. Opacity
Opacity indicates how cleanly your appliance is burn-
ing. Opacity is measured in percent; 100% opacity is
when an object is totally obscured by the smoke column
from a chimney, and 0% opacity means that no smoke
column can be seen. Periodically check the opacity and
burn your appliance as nearly smoke-free as possible
(goal of 0% opacity).
6. Creosote Formation
When wood is burned slowly, it produces tar and other
organic vapors which combine with expelled moisture
to form creosote. The creosote vapors condense in
the relatively cool chimney flue of a newly-started or
a slow-burning fire. As a result, creosote residue ac-
cumulates on the flue lining.
When ignited, creosote creates an extremely hot fire
which may damage the chimney or even destroy the
house.
The chimney shall be inspected at least annually be-
fore lighting, or once every two months during heating
season.
When creosote has accumulated it should be removed
to reduce the risk of a chimney fire.
D. Building a Fire
1. First Fire
Before lighting your first fire make certain that:
• the baffle and ceramic blanket are correctly positioned,
resting against the rear support
• the baffle protector channel is in position
• firebricks are in place
• all labels have been removed from glass and trim
• all plated surfaces have been wiped clean with a damp
cloth
NOTICE: Oils can cause permanent markings on plating if
not removed before the first fire.
When burning your first fire, you will experience smoke
and odor from the appliance resulting from the curing
of paint and burning off of any oils remaining from
manufacturing.
OPEN WINDOWS DURING INITIAL BURN TO
DISSIPATE SMOKE AND ODORS!
• Odors may be irritating to sensitive individuals.
• Smoke detectors may activate.
CAUTION
15
Quadra-Fire • Adventure-III Owner’s Manual • 4083-900 • Rev D • 09/15
