8
Fireplace Setup
A. Firebrick Placement
The firebox of your fireplace is lined with high quality fire-
brick, which has exceptional insulating properties.
Do not use a grate; simply build a fire on the firebox floor.
Do not operate the fireplace without bricks. Make sure
bricks are installed as shown.
IMPORTANT: The bricks are very similar in size. Be certain
you have the proper brick in the correct location. Measure
the brick size for accuracy.
- Remove new brick set from box and lay out to
diagram as shown in Figure 8.2
.
- Lay bottom bricks in firebox.
- Install rear bricks on the top of the bottom bricks.
Slide top of bricks under clip on back of firebox wall
and push bottom of brick back.
- Install side bricks. Slide top of brick under clips on
side of firebox and push the bottom of the brick until
it is flush with the side of the firebox.
4
5
5
5
5
5
5
5
5
3
5
5
5
5
5
2
2
2
2
2
4
5
5
5
3
1
1
5
5
5
5
5
5
5
5
5
5
1
1
4
2
2
2
2
2
4
5
5
5
3
5
5
5
3
Left Side
Right Side
Back
Floor
1-1/4"
3-1/4"
9.0"
1
#
Brick Size
Qty. In Set
1 9” x 3-1/4” x 1-1/4” Angled
(see drawing)
2
2 6-1/4” x 4-1/2” x 1-1/4”
5
3 9” x 2” x 1-1/4”
2
4 6-1/4” x 3-1/2” x 1-1/4”
2
5 9” x 4.5” x 1-1/4”
16
Figure 8.1
Fire Brick Configurations
Figure 8.2
Fire Brick Configurations
Table 8.1
40
Quadra-Fire • 7100 FP • 433-3610 Installation Manual • Rev G • 5/27/14
