QTech QSW-2800 series, Руководство по настройке

Страница: 339 / 415

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
325
Chapter 45 IPv6 Security RA Configuration
45.1 Introduction to IPv6 Security
RA
In IPv6 networks, the network topology is generally compromised of routers, layer-two
switches and IPv6 hosts. Routers usually advertise RA, including link prefix, link MTU and
other information, when the IPv6 hosts receive RA, they will create link address, and set the
default router as the one sending RA in order to implement IPv6 network communication. If a
vicious IPv6 host sends RA to cause that normal IPv6 users set the default router as the
vicious IPv6 host user, the vicious user will be able to capture the information of other users,
which will threat the network security. Simultaneously, the normal users get incorrect address
and will not be able to connect to the network. So, in order to implement the security RA
function, configuring on the switch ports to reject vicious RA messages is necessary, thus to
prevent forwarding vicious RA to a certain extent and to avoid affecting the normal operation of
the network.
45.2 IPv6 Security RA
Configuration Task Sequence
1. Globally enable IPv6 security RA
2. Enable IPv6 security RA on a port
3. Display and debug the relative information of IPv6 security RA
1. Globally enable IPv6 security RA
Command Explanation
Global Configuration Mode
ipv6 security-ra enable
no ipv6 security-ra enable
Globally enable and disable IPv6 security RA.
2. Enable IPv6 security RA on a port
Command Explanation
Port Configuration Mode
ipv6 security-ra enable
no ipv6 security-ra enable
Enable and disable IPv6 security RA in port
configuration mode.