QTech QSW-2800 series, Руководство по настройке

Страница: 205 / 415

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
191
(2) Configure DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
network-address <network-number>
[mask | prefix-length]
no network-address
Configure the address scope that can be
allocated to the address pool. The no operation
of this command cancels the allocation
address pool.
default-router
[<address1>[<address2>[…<address8>]]]
no default-router
Configure default gateway for DHCP clients.
The no operation cancels the default gateway.
dns-server
[<address1>[<address2>[…<address8>]]]
no dns-server
Configure DNS server for DHCP clients. The
no command deletes DNS server
configuration.
domain-name <domain>
no domain-name
Configure Domain name for DHCP clients; the
“
no domain-name
” command deletes the
domain name.
netbios-name-server
[<address1>[<address2>[…<address8>]]]
no netbios-name-server
Configure the address for WINS server. The no
operation cancels the address for server.
netbios-node-type {b-node|h-node|m-
node|p-node| <type-number> }
no netbios-node-type
Configure node type for DHCP clients. The no
operation cancels the node type for DHCP
clients.
bootfile <filename>
no bootfile
Configure the file to be imported for DHCP
clients on boot up. The no command cancels
this operation.
next-server
[<address1>[<address2>[…<address8>]]]
no next-server
[<address1>[<address2>[…<address8>]]]
Configure the address of the server hosting file
for importing. The no command deletes the
address of the server hosting file for importing.
option <code> {ascii <string> | hex <hex>
| ipaddress <ipaddress> }
no option <code>
Configure the network parameter specified by
the option code. The no command deletes the
network parameter specified by the option
code.
lease { days [hours][minutes] | infinite }
no lease
Configure the lease period allocated to
addresses in the address pool. The no
command deletes the lease period allocated to
addresses in the address pool.
max-lease-time {[< days >] [< hours >]
[< minutes >] | infinite}
Set the maximum lease time for the addresses
in the address pool; the no command restores