QTech QSW-2800 series Скачать руководство пользователя страница 305

Страница: 305 / 415

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1

291

When the MAC-based method is used, all the users accessing a port should be authenticated

separately, only those pass the authentication can access the network, while the others can

not. When one user becomes offline, the other users will not be affected.

When the user-based (IP MAC port) method is used, all users can access

limited resources before being authenticated. There are two kinds of control in this method:

standard control and advanced control. The user-based standard control will not restrict the

access to limited resources, which means all users of this port can access limited resources

before being authenticated. The user-based advanced control will restrict the access to limited

resources, only some particular users of the port can access limited resources before being

authenticated. Once those users pass the authentication, they can access all resources.

Attention: when using private supplicant systems, user-based advanced control is

recommended to effectively prevent ARP cheat.

The maximum number of the authenticated users can be 4000, but less than 2000 will be

preferred.

38.1.6 The Features of VLAN Allocation

1. Auto VLAN

Auto VLAN feature enables RADIUS server to change the VLAN to which the access port

belongs, based on the user information and the user access device information. When an

802.1x user passes authentication on the server, the RADIUS server will send the

authorization information to the device, if the RADIUS server has enabled the VLAN-assigning

function, then the following attributes should be included in the Access-Accept messages:

Tunnel-Type = VLAN (13)

Tunnel-Medium-Type = 802 (6)

Tunnel-Private-Group-ID = VLANID

The VLANID here means the VID of VLAN, ranging from 1 to 4094. For example, Tunnel-

Private-Group-ID = 30 means VLAN 30.

When the switch receives the assigned Auto VLAN information, the current Access port will

leave the VLAN set by the user and join Auto VLAN.
Auto VLAN won’t change or affect the port’s configuration. But the priority of Auto VLAN is

higher than that of the user-set VLAN, that is Auto VLAN is the one takes effect when the

authentication is finished, while the user-set VLAN do not work until the user become offline.

Notes: At present, Auto VLAN can only be used in the port-based access control mode, and on

the ports whose link type is Access.

2. Guest VLAN

Guest VLAN feature is used to allow the unauthenticated user to access some specified

Содержание QSW-2800 series
































































































































































































































































































































































































































Результаты поиска

Содержание QSW-2800 series

Отзывы:

Похожие инструкции для QSW-2800 series

Бренды по названию

Популярные бренды

QTech QSW-2800 series, Руководство по настройке

Результаты поиска

Содержание QSW-2800 series

Отзывы:

Похожие инструкции для QSW-2800 series

Бренды по названию

Популярные бренды