25
INSTALLATION INSTRUCTIONS
DDD
EEE
FFF
GGG
61.
Line up the mounting holes and secure the Stabilizer to the
vehicle floor by using the mounting hardware provided with
the Stabilizer. Place the bolt through the Stabilizer base,
vehicle floor, washer and secure it with the lock nut (
DDD
).
Make sure the Stabilizer does not shift in any direction while
mounting it.
62.
Repeat step 61 for the remaining 3 corner holes (
EEE
).
Make sure 2 to 3 threads of the bolts are sticking out after
they are secured with the lock nuts.
63.
Push the Manual Release Lever to release the wheelchair from
the Docking System (
FFF
).
Proceed to step 69.
MOUNTING THE ADVANCED STABILIZER
64.
Remove the 6 Socket Head Screws (5/16 - ½”) that attach the
QLK-150 Cover onto the side flange (
GGG
).
