Q'STRAINT AL600 Series, Руководство по установке

Страница: 13 / 36

13
Frontal Clear Zones (FCZ) = 26” (660mm) with Shoulder Belt
We recommend using Shoulder and Lap Belts to reduce the possibility of head and chest impacts with vehicle
components. FCZ may not be achievable with wheelchair-seated drivers.
Recommended tiedown anchorage distances are based on common wheelchair sizes. The front to rear tiedown
distance should be assessed by projecting the recommended tiedown angles shown in Figure (1) from the
wheelchair securement points on the wheelchair onto a horizontal plane. Exceptionally large or small wheelchairs
may require anchorage spacing that differs from our recommendations.
Distances for the placement of the Upper Shoulder Belt Anchorage and/or the Shoulder Belt
Retractor will vary for different Occupant Restraint Systems. The section SHOULDER AND
LAPBELT INSTALLATION should be read before installing floor anchorages.
Side View
Top View
8
16” (450mm)
8
FCZ
From 40” (1016mm) for 6-Year Old Child)
To 61” (1549.4mm) for a Tall Adult
AND
8
FCZ
8
17.72” (450mm)
8
8” (200mm)
8
8” (200mm)
45º
30º 40º
60º
32º
20º
27 ”
( 685 mm)
34 ”
( 865 mm)
13 ”
( 330 mm)
15 ”
( 380 mm)
6º
11º
Please CONTACT Q’Straint® in the event that the vehicle’s geometry is outside the recommended installation instructions.
REAR VIEW SIDE VIEW FRONT VIEW
48 ” - 54 ”
( 1220 mm - 1520 mm)
Wheelchair
Reference Plane
Wheelchair
Reference Plane
Front
Securement Points
Rear
Securement Points
2A 2B
1
FLOOR ANCHORAGE LAYOUT REQUIREMENTS