manualshive.com logo in svg

QSI 520, Руководство пользователя, Страница: 81 / 81

Поделиться
Скачать
QSI 520 Скачать руководство пользователя страница 81

 

 

78

Shipping Costs 

The customer is respon
when returning a prod

sible for all costs in shipping to QSI. QSI will pay shipping costs 

uct to the customer. All replacement/repaired products are shipped 

 TO THE 

Y 

M 

SCIENTIFIC IMAGING SHALL 

, 

 

N 

TER 

IN AMOUNT THAN THE PURCHASE PRICE OF THE QSI SCIENTIFIC CAMERA SOLD 

Y FOR 

S AND 

 OF 
LLOW 

 

via UPS Ground unless a rush is requested. The cost of such a shipping upgrade is to be 
paid by the customer prior to shipment. 

NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES
QSI SCIENTIFIC CAMERA AFTER THE APPLICABLE PERIOD OF THE EXPRESS 
LIMITED WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR 
GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTIT
WITH RESPECT TO THE QSI SCIENTIFIC CAMERA SHALL BIND QUANTU
SCIENTIFIC IMAGING, INC. (SOME STATES AND PROVINCES DO NOT ALLOW 
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE 
LIMITATION MAY NOT APPLY TO YOU.) QUANTUM 
NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, INCONVENIENCE, 
EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES
LOSS OR CORRUPTION OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES CAUSED BY THE USE OR MISUSE OF, OR INABILITY
TO USE, THE QSI SCIENTIFIC CAMERA, REGARDLESS OF THE LEGAL THEORY O
WHICH THE CLAIM IS BASED, AND EVEN IF QUANTUM SCIENTIFIC IMAGING HAS 
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL 
RECOVERY OF ANY KIND AGAINST QUANTUM SCIENTIFIC IMAGING BE GREA

BY QUANTUM SCIENTIFIC IMAGING AND CAUSING THE ALLEGED DAMAGE. 
WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILIT
LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHER
THEIR PROPERTY ARISING OUT OF USE OR MISUSE OF, OR INABILITY TO USE, 
THE QSI SCIENTIFIC CAMERA NOT CAUSED DIRECTLY BY THE NEGLIGENCE
QUANTUM SCIENTIFIC IMAGING. (SOME STATES AND PROVINCES DO NOT A
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, 
SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.) THIS 
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE 
ORIGINAL PURCHASER OF THE QSI SCIENTIFIC CAMERA, OR THE PERSON FOR
WHOM IT WAS PURCHASED AS A GIFT, AND STATES YOUR EXCLUSIVE REMEDY. 

 

Содержание 520


















































































Отзывы:

Нет отзывов