Q S I 5 0 0 S E R I E S U S E R G U I D E
39
If you don’t see “QSI Universal” listed in the M
button in the upper left corner under Main CCD
ain CCD Camera field, click the “Setup”
Camera. The window below will open.
Select “QSI Universal” from the pop-up menu. Click OK.
That will take you back to the Camera Control Window. Click the “Connect” button to
establish communication between MaxIm and your QSI camera. If MaxIm connects
properly the Camera Control window will look like this:
Note that the current temperature of the CCD is displayed in the “Main CCD Camera” field
toward the upper left of the Camera Control window. The “Setpoint” is the temperature that
camera will cool the CCD to, and may be different than shown above.