QNAP TVS 72XT Series Скачать руководство пользователя страница 5

Страница: 5 / 61

2. Product Overview

This chapter provides basic information about the QNAP TVS-x72XT NAS.

About the TVS-x72XT

The TVS-x72XT is a high-performance NAS powered by an Intel® processor and supports up to 16 GB of

DDR4 memory. It features an HDMI port for external displays and a USB One Touch Copy port for quick and

convenient backup and data transfer. In addition to its three network ports (two 1GbE and one 10GbE), the

TVS-x72XT is equipped with two Thunderbolt™ 3 ports (through its PCIe 3.0 x16 slot) that provide a wide

range of possibilities, including extra data management capabilities and additional multimedia support.

Hardware Specifications

Warning

If your QNAP product has hardware defects, return the product to QNAP or a QNAP-

authorized service center for maintenance or replacement. Any attempt to repair or

perform maintenance procedures on the product by you or an unauthorized third-party

invalidates the warranty.

QNAP is not responsible for any damage or data loss caused by unauthorized

modifications and installation of unsupported third-party applications.

For details, see the

QNAP Warranty Terms and Conditions

Component

TVS-472XT

TVS-672XT

TVS-872XT

Ordering Information
Ordering P/N

TVS-472XT-PT-4G

TVS-672XT-i3-8G

TVS-872XT-i5-16G

Processor
CPU

Intel® Pentium® G5400T Intel® Core™ i3-8100T

Intel® Core™ i5-8400T

Frequency

Dual-core 3.1 GHz

4-core 3.1 GHz

6-core 1.7 GHz base/3.3

GHz turbo

Architecture

x86 64-bit

Encryption engine

AES-NI

Graphics

Embedded Intel® UHD

610 graphics processor

Embedded Intel® UHD 630 graphics processor

Memory
Pre-installed memory

4 GB RAM: 2 x 2 GB

SODIMM DDR4

8 GB RAM: 2 x 4 GB

SODIMM DDR4

16 GB RAM: 2 x 8 GB

SODIMM DDR4

Memory slots

2 x SODIMM DDR4

Important

• Use only QNAP memory modules to maintain system

performance and stability. For NAS devices with more

than one memory slot, use QNAP modules with identical

specifications.

• Using unsupported modules may degrade performance,

cause errors, or prevent the operating system from

starting.

Maximum memory

32 GB RAM: 2 x 16 GB

Flash memory

4 GB USB DOM

TVS-x72XT User Guide

Product Overview

Содержание TVS 72XT Series






























































Результаты поиска

Содержание TVS 72XT Series

Отзывы:

Похожие инструкции для TVS 72XT Series

Бренды по названию

Популярные бренды

QNAP TVS 72XT Series, Руководство пользователя

Результаты поиска

Содержание TVS 72XT Series

Отзывы:

Похожие инструкции для TVS 72XT Series

Бренды по названию

Популярные бренды